Fire Prevention System

The main purpose of this system is prompt fire-fighting through the fully automatic detection of fire. Immoderate damages caused to the vehicle are reduced and possible repairs are minimised.


"Fire avoiding system"

Down-time caused by long vehicle repair times or total loss of the vehicle are prevented.
There are no appreciable negative impacts on the environment, because the extinguishing device is environmentally safe and degradable.

Stage 1: Preventive Fire Prevention!
In the event of frontal impact, the system is activated and the hot parts of the engine compartment are sprayed (several sprays are used) with extinguisher for approximately three minutes.

Stage 2: Fully Automatic Fire Detection
If there is another reason for the fire, the system is activated and automatically extinguishes the fire by using several sprays for approximately three minutes. Stages 1 and 2 are essential especially if victims are trapped or unconscious.

Stage 3: Manual and Mobile Use
Up to 90% of vehicle fires can be extinguished manually.. In cases of emergency, the approx. 8m long hose can be attached to the snap-on mounting at the bottom of the driver’s seat. The emergency hose can also be attached to the snap-on mounting of the extinguishing device tank.
This tank can then be used like a standard extinguisher.

The extinguishing system can be used for all cars, buses, lorries, construction vehicles, agricultural equipment, rail cars and aircraft.